OpenThings Forums RFToy 433 MHz receiver and nRF24L01 simultaneously

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #18074

    creckord
    Participant

    Hi,

    I have multiple rf switches that I’d like to operate with the RFToy. Some of them operate at 433 MHz and some at 2.4 GHz.

    So my question is if the RFToy supports having both transmitter shields plugged in at the same time (ignoring space constraints, and not necessarily transmitting at the same time), and whether I could then make the firmware adress one or the other programmatically.

    #18077

    Ray
    Keymaster

    Is this referring to the original RFToy? (which has plugs for both 433M/315M transmitter and 2.4G transceiver) The current version of RFToy only support 433M/315M transmitter and no longer has plug for 2.4G transceiver; on the other hand, it has built-in WiFi for web-based control.

    #18078

    creckord
    Participant

    Oh dang, no. I was actually talking about the new one, but missed the fact that it doesn’t have the 2.4 plug (looks like I mis-clicked and opened the old one’s manual). In that case, never mind.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenThings Forums RFToy 433 MHz receiver and nRF24L01 simultaneously